Skip to main content

«  View All Posts

Washing Machine Leaks: What to Do Before Water Reaches the Rest of Your Home

4 min read

By Valeria Chumbiauca

Washing Machine Leaks: What to Do Before Water Reaches the Rest of Your Home

You walk into the laundry room and notice a puddle of water spreading across the floor. Before you can figure out if the drain has overflowed or a house came loose, it’s already reached the baseboards or started creeping toward the hallway. Now you have two problems: the leak itself and the possibility of water damage beyond the laundry room.

At Restore-It, we know that the water you see isn’t always the full extent of the problem. Acting quickly can help limit the damage, but it’s also important to check where the moisture has traveled. Here is how to respond safely and decide what to do next!

Your next step is to stop the water safely, limit its spread, and check which areas may have been affected. This guide explains what to do first, what to look for, and when a washing machine leak may require professional water damage restoration.

What Should You Do First When Your Washing Machine Leaks?

Your priority is to stop the water without putting yourself at risk.

  1. Stop the washing machine. Stop the cycle if you can safely reach the controls without touching wet electrical components.
  2. Shut off the water supply. Close the hot and cold supply valves if they are accessible and safe to reach.
  3. Avoid electrical hazards. Never touch wet plugs, outlets, or appliances while standing in water. If water is near electrical equipment, stay clear and seek qualified help.
  4. Contain the spill. If it is safe, use towels to absorb a small amount of water and prevent it from spreading.
  5. Move belongings. Remove laundry baskets, rugs, and other items from the affected area when safe.

Once the immediate problem is under control, check nearby flooring and doorways. Water can travel farther than you expect.

Need help deciding what to do after the leak stops? Use our guide below to understand the next steps for protecting your home after water damage.

How Can You Keep Washing Machine Water From Spreading?

If the water has not reached electrical hazards or contaminated areas, these steps may help limit further damage:

  • Remove rugs and movable belongings from the wet area.
  • Absorb accessible standing water using appropriate equipment.
  • Check doorways, closets, and nearby rooms for dampness.
  • Keep people and pets away from slippery surfaces.
  • Avoid moving a heavy washing machine to investigate the leak.

Do not use a household vacuum to collect water unless it is designed for wet pickup.

Area

Signs to check

Carpet and padding

Dampness or moisture beneath the surface

Hardwood or laminate

Swelling, buckling, or raised edges

Baseboards and drywall

Stains, bubbling paint, or soft spots

Nearby rooms

Damp flooring or water along doorways

Ceiling below

New stains or dripping if the laundry room is upstairs

These signs can reveal possible damage, but they cannot confirm that hidden materials are dry.

If the laundry room looks dry but you suspect water has slipped beneath the appliance, look more closely for warning signs. Our related article explains why some appliance leaks go unnoticed. Read here:

Where Can Washing Machine Water Damage Hide?

Water does not always stay on the surface. Depending on the amount released and your home's layout, it may reach carpet padding, subflooring, drywall, cabinets, or adjoining rooms.

The U.S. Environmental Protection Agency (EPA), in its guide A Brief Guide to Mold, Moisture and Your Home, emphasizes the importance of fixing moisture problems and drying affected materials promptly.

A floor that feels dry underfoot does not necessarily mean the materials underneath are dry, too. Watch for swelling, persistent dampness, discoloration, or new stains. If you cannot determine how far the water traveled, consider a professional moisture assessment rather than assuming surface cleanup was enough.

Wondering why some water-damaged floors need more attention than others? Our guide explains why removing flooring may sometimes be necessary to address affected materials. Read below!

Can You Clean Up a Washing Machine Leak Yourself?

That depends on how much water escaped and which materials became wet.

Situation

Recommended next step

Small spill on a hard floor

Absorb the water and dry the surface thoroughly.

Wet rugs or movable belongings

Remove them from the area if safe and dry them appropriately.

Wet carpet padding or subflooring

Consider professional moisture assessment and drying.

Damp drywall, baseboards, or cabinets

Have the affected materials assessed.

Recurring leak or unknown source

Stop using the machine and contact an appliance technician or plumber.

The EPA recommends drying wet materials within 24–48 hours to help prevent mold growth. This is a useful target, not a guarantee. Towels may remove visible water while moisture remains trapped beneath flooring or inside other materials.

Fans and dehumidifiers can help in appropriate circumstances, but they do not guarantee that concealed areas have dried completely. Do not use electrical equipment where water creates a safety hazard.

If you want to understand why the first day matters after a leak, our next guide explains what happens as water affects a property. Read below:

How Can You Help Prevent Another Washing Machine Leak?

A few regular checks can help you spot problems before they lead to another cleanup.

  • Inspect accessible supply hoses for cracks, bulges, or leaks around connections.
  • Check the drain hose and surrounding area for signs of water escaping.
  • Investigate recurring puddles instead of assuming they are harmless.
  • Follow the manufacturer's instructions for hose maintenance and replacement.
  • Know where the water shutoff valves are before an emergency happens.

If the machine leaks repeatedly, stop using it until the cause has been identified.

What Should You Do After a Washing Machine Leak?

Stopping the leak is a good first step, but checking what got wet is just as important. You may be able to manage a small spill yourself. If water has reached flooring, walls, or adjoining rooms, though, the next step is to find out how far it has spread.

You don’t have to guess whether hidden moisture is a concern. Restore-It helps homeowners in El Dorado, Camden, and surrounding South Arkansas communities assess water damage and determine what drying or restoration may be needed.

If water has spread beyond the immediate spill, contact Restore-It to discuss your next steps. Visit our water and flood restoration service page or call our El Dorado office at 870-918-0041.

A quick response can make a difference. Stop the water safely, check the affected areas, and get help when the damage extends beyond what you can confidently dry yourself.